All Products

Lord Sconce is a simple understated wall light. Lord Sconce enjoys being placed above your shoulder or head and can also be used as a ceiling fixture.

Available in 2 sized backing plates (150mm and 200mm), Lord Sconce is stamped from solid brass resulting in a smooth and clean product suitable for any space. Lord Sconce is also available now in a powdercoated version.

MATERIAL: BRASS
DIMENSIONS: 150⌀/ 200⌀ x 61MM

↓  Download Technical Data Sheet
↓  Download Standard Colour Sheet

Please note these fixtures can not be installed on brick walls, are not suitable for wet areas and must be installed at least 1.8metres from the floor. Bulb not supplied.

The Hooked Up tie designed by Isaac Francis in collaboration with Dowel Jones references the ubiquitous zip tie. Made from natural vegetable tanned leather and black leather, Hooked Up is available in 2 sizes. Designed with no specific use in mind, the tie could be used to roll up fabric, create straps for shopping bags, form chains and even used as a hair tie.

MATERIAL: NATURAL & BLACK LEATHER
DIMENSIONS: 140/300 X 100 X 19MM
DESIGNER: ISAAC FRANCIS FOR DOWEL JONES

Please note that leather is a natural material whose colouring will mature over time.

Made from a solid piece of American Oak, Blocchi is a desk friend, there to organise. Singularly or together, Blocchi will always be there for you.

MATERIAL: AMERICAN OAK
DIMENSIONS: 127 X 100 X 23MM

Cut entirely from leather offcuts, YOU Rule is a 30 centimeter ruler. YOU Rule is flexible and available in 4 different leathers.

Please note that leather is a natural material whose colouring with mature over time. Leather will also stretch over time so measurements may not be 100% accurate.

MATERIAL: LEATHER
DIMENSIONS: 300 X 31 X 4MM

Not your average mouse pad, Tombstone Mousepad is cut from a single piece of natural untanned leather. Feel like making it a feature? The Tombstone Mousepad can also come with a cararra marble backing. The edges are finished and hand-dyed.

MATERIAL: LEATHER/ LEATHER &  CARARRA MARBLE
DIMENSIONS: 200 X 216 X 4MM

Please note that leather is a natural material whose colouring will mature over time. Please also note that the Tombstone Mousepad with Carrara marble, the marble component is not mounted to the leather.

The ATC Chair (Another Tube Chair) is rich with personality. Made from bent tubular steel with a solid timber seat, the large round back rest is shaped to cradle the back. Designed with functionality and versatility in mind, both the frame and seat colours can be customised making the ATC Chair incredibly versatile.

MATERIAL: POWDER COATED STEEL, AMERICAN OAK
DIMENSIONS: 480 X 520 X 705MM

↓  Download Standard Colour Sheet

Dowel Jones first solid timber collection, Tim Ber is made in Geelong, Australia. Tim Ber was designed with simple principles and aesthetic with no joins visible. The bench is made up of only a few elements, spanning 1.4 metres wide allowing for 3 people to comfortably sit, with the potential to customise stain, finish and size.  Tim Ber is produced with several universal elements to allow for production efficiencies.

MATERIAL: AMERICAN OAK/ AMERICAN ASH/ WALNUT
DIMENSIONS: 390 X 450 X 1400MM

↓  Download Technical Data Sheet

Please e-mail us for custom timber stains or finishes.

Dowel Jones first solid timber collection, Tim Ber is made in Geelong, Australia. Tim Ber was designed with simple principles and aesthetic with no joins visible. The high stools are made up of only a few elements, available in both 650 and 750 heights with the potential to customise stain and finish.  Tim Ber is produced with several universal elements to allow for production efficiencies.

MATERIAL: AMERICAN OAK/ AMERICAN ASH/ WALNUT
DIMENSIONS: 380 X 380 X 650/750MM

↓  Download Technical Data Sheet

Please e-mail us for custom timber stains or finishes.

Dowel Jones first solid timber collection, Tim Ber is made in Geelong, Australia. Tim Ber was designed with simple principles and aesthetic with no joins visible. The stool is made up of only a few elements, with the potential to customise stain and finish.  Tim Ber is produced with several universal elements to allow for production efficiencies.

The Tim Ber stool is happy being stacked.

MATERIAL: AMERICAN OAK/ AMERICAN ASH/ WALNUT
DIMENSIONS: 380 X 380 X 450MM

↓  Download Technical Data Sheet

Please e-mail us for custom timber stains or finishes.

Designed and manufactured in Australia, Bradley Hooper is a range of simple stools, coffee tables and side tables. The Bradley Hooper coffee table features a solid timber top available in 2 sizes. Concentric rings in the Bradley Hooper side table hold bent wire forms to create a bottle like shape. Bradley Hooper coffee tables are available in a range of finishes.

MATERIAL: STEEL WIRE, AMERICAN ASH/ AMERICAN OAK/ WALNUT
DIMENSIONS: 422 X 620/820 X 620/820MM

↓  Download Standard Colour Sheet

Designed and manufactured in Australia, Bradley Hooper is a range of simple stools, coffee tables and side tables. The Bradley Hooper side table features a spun metal dish, complimented by a cork insert. Concentric rings in the Bradley Hooper side table hold bent wire forms to create a bottle like shape. Bradley Hooper side table is available in a range of finishes.

MATERIAL: STEEL WIRE, SPUN STEEL, CORK
DIMENSIONS: 484 X 435 X 435MM

↓  Download Technical Data Sheet
↓  Download Standard Colour Sheet

Designed and manufactured in Australia, Bradley Hooper is a range of simple stools, coffee tables and side tables. The Bradley Hooper stool features a solid timber top. Concentric rings in the Bradley Hooper stool hold bent wire forms to create a bottle like shape. Bradley Hooper stools are available in a range of finishes.

MATERIAL: STEEL WIRE, AMERICAN ASH/ AMERICAN OAK/ WALNUT
DIMENSIONS: 484 X 435 X 435MM

↓  Download Standard Colour Sheet

The Hurdle Tray side table is made up of a simple tubular frame and a spun steel dish. The Tray side table is incredibly practicle, designed as a stackable table it is powdercoated for durability making it perfect for indoors and outdoors. 

MATERIAL: POWDERCOATED STEEL
DIMENSIONS: 500 X 400 X 450MM

↓  Download Technical Data Sheet
↓  Download Standard Colour Sheet

Half chair half stool, the Half Hurdle chair was designed as a simple chair for all occasions. With variations including a solid American oak seat, ply seat or B+W speckled seat, the Half Hurdle chair is made up of 2 simple tube components almost disconnected from eachother, forming the backrest and legs. We worked with some of Melbourne's best metal fabricators to create a cost-effective whilst also classic chair.

MATERIAL: POWDER COATED STEEL, AMERICAN OAK/ PLY
DIMENSIONS: 525 X 520 X 565MM

→  Download Technical Data Sheet
→  Download Standard Colour Sheet

Half chair, half high stool, the Half Hurdle Chair was designed as a simple solution to bar and counter top seating. 

MATERIAL: POWDER COATED STEEL, AMERICAN OAK/EUROPEAN BEECH
DIMENSIONS: 525 X 520 X 770/870MM

↓  Download Standard Colour Sheet